Bale Feeder. Single Layer, Single Row

Just One Moving Part!

Plucks Square bale feeders are unique where your bales are feed out by just one moving part and that is the pushing frame that travels the length of the deck. This model has only 6 grease nipples.

Plucks Single Layer Square bale feeder can carry and feed out 4 of Baleage bale’s or 3 of big square straw bales up to 2.2 meters long each, or any combination of both that doesn’t exceed the working deck length of 7.1 meters.

Operating Procedure

Plucks Bale feeders can carry and feed out any type of Big or medium square bale. You simply load the bale feeder with your tractor or front-end loader of some sort, then access the bales via the stairs and walkway to cut all the strings and leave the strings in the yard so no risk of strings ending up in the paddock. Then travel to your paddock and begin feeding out your bales by engaging the hydraulic the pusher frame at the front of the trailer, which travels very slowly along its tracks towards the back, and in doing so quietly pushes your bales off the rear edge one slab at a time as they break away from the bales.

So, how does it do it!

The spring-loaded, heavy-duty Tedder fingers, mounted on the vertical and overhead beams at the rear of the trailer, ensure precise control over the bale slabs. Only the slabs that have been pushed past the reach of these Tedder fingers are able to fall off, much like a deck of cards being pushed off a table one by one.

Feed out rate.

By controlling your tractor and bale feeder travel speed to a good fast walking pace, you will create a 2 to 3 meter gap between the bale slabs as they fall.

Also, they can feed out any width of bale from Medium Square at 850mm wide up to Big Square at 1.250 Meters wide and any height.

Please contact us for more info and detail on how they work.


There's nothing worse than machinery letting you down at the critical moment. Don't settle for imitations.

Call today on 0800 758 257 or click the button to send an enquiry.