Morris Industries Canada Air Seeder
Morris Industries Canada Air Seeding
Pluck’s Engineering is the NZ out let for Morris Ind Air Seeding equipment.
Morris Ind Manufacture a huge range of Air seeders suitable for NZ farming conditions, their working widths start a 6.0M and row spacing available for NZ farmers of 7” (180mm) up to 9” (230mm) as single seed row per leg or double row per leg, also they can be set up to drill fertiliser at the same time as your seed, and in between or beside the seed rows on each leg.
There is a huge range of drill point type available, from narrow single row direct drill type all the way through a very wide sweep type point that drills into cultivated ground and leaves a seed row 4” (100mm) wide per leg.
Morris Ind Canada is a 75 year old company that have been at the front of Air Seeding development most of that time.
Currently they continue to manufacture a huge range of Air Carts that start in size at 5 cubic meters (5Tonnes approx), all of their air carts can hold both Seed and fret in twin separate tanks so you can drill seed and fert at the same time but drilled into the ground by separate delivery air systems giving you the perfect seed placement and start in life with your fert drilled either beside or in between your seed rows depending on your choice of drill point.
The Air Carts come in 3 wheel trike type setup or 4 wheel narrow rows with a front pivoting beam and castor wheels to ensure all 4 wheels stay on the ground all the time.
For more info please click the link to take you through to Morris Ind web site www.morris-industries.com
Testimonials
"We purchased two rollers, one from Pluck's and one from another company; in the first year, the other company roller was sent back because it leaked, and five years later, the Pluck's roller has never been touched."
Andrew Horne
DUNSANDEL
“It is vital for the roller to be the right fit for moving around the farm with stock and mowing. They don’t break down and we like the prompt service from Pluck’s.”
Dan Symonds
ALFORD FOREST
“We were looking for new trailers as ours had passed their use by date. In a large farm of 1050 cows, a high staff numbers situation, with a team of 5 we were looking to keep things simple and look after staff and animal welfare. When we saw the Benic calf trailer, it immediately stood out as a trailer that would be good for staff, loading at standing height, but also importantly very easy on the calves.
Having the calves hanging rather than standing in a trailer means they can’t fall over and be trampled. This is very helpful for calves that are not long born and we are finding calves arriving at the calf shed in much better condition, clean and no more bleeding navels. Although sometimes a frustration for the team, the set number of slings on the trailer has meant that trailers never get overloaded to save a trip; far better for the calves.
The Benic trailer encourages our staff to treat the calves better by not throwing them in a trailer over the top and or throwing too many in a trailer to save a trip. We recommend the Benic calf trailer.”